Users of the Samsung Galaxy Tab PRO 8.4 T320 Wi-Fi can now update the device to the latest Android 4.4.2 KitKat running the build version UEU1ANAI. The firmware is an official release from Samsung which can be flashed manually using ODIN flash tool on a computer.

Requirements

1. Use this official firmware to the Samsung Galaxy Tab PRO 8.4 T320 Wi-Fi only.

2. Create a manual backup all data files and personal settings on the tablet.

3. Battery level should be at least 50 per cent to avoid power interruption during installation.

4. Enable USB debugging mode on the Galaxy Tab PRO 8.4.

5. Download the necessary USB drivers for Galaxy Tab PRO 8.4 on the computer. Installing of Samsung Kies on the computer then connecting the tablet will also install the USB drivers.

6. Download the ODIN flash tool version 3.09 and the official Android 4.4.2 T320UEU1ANAI KitKat firmware on the computer.

Warning: We are not responsible for any errors which may occur on the device. Read and follow the instructions to any avoid issue. Do this at your own risk.

Flashing Instructions

1. Switch off the Samsung Galaxy Tab PRO 8.4 Wi-Fi tablet.

2. Reboot into Download mode by pressing and holding volume down, home and power keys at the same time till the Android logo appears.

3. Extract the ODIN flash tool and the official Android 4.4.2 KitKat firmware to an easy access location on the computer.

4. Launch the ODIN flash tool on the computer.

5. Connect the Samsung Galaxy Tab PRO 8.4 to the computer using a USB cable.

6. ID:COM should turn yellow if the device has been detected by the computer. Otherwise, install the necessary USB drivers.

7. On the ODIN flash tool, select the following files for installation:

a. Click PDA then select the file with CODE in its name.

b. Click PHONE then select the file with MODEM in its name. If not found, ignore this step.

c. Click CSC then select the file with CSC in its name. If not found, ignore this step.

d. Click on PIT then select the ".pit" file. If not found, ignore this step.

8. Check on the AUTO REBOOT and F.RESET TIME on the ODIN flash tool.

9. In case a ".pit" file has been selected, check on the RE-PARTITION option on the ODIN flash tool. Otherwise, leave the option UNCHECKED.

10. Hit the START button to begin installation on the ODIN flash tool.

11. After the installation which may take up to five minutes, the device will restart.

12. Once the Galaxy tablet reaches the home screen, it can now be unplugged from the USB connection.

For any bug reports or issues, kindly send your feedback to Android Jinn Android 4.4.2 UEU1ANAI Web page.